The Zenius printer is designed for single sided printing and encoding of a very large variety of plastic cards. Zenius generates colour or monochrome cards, individually or in small runs, with top quality results. Zenius is a user-friendly, compact and cost-effective solution for delivering your personalized cards.
Using encoding technologies, the evolis zenius prints 120-150 single sided colour cards per hour or 400-500 monochrome cards per hour
Evolis prioritizes the use of recycled materials to design printers to reduce CO2 emissions and power consumption of its printers with an efficient prolonged standby mode.
The Zenius printer does more than print ID cards. Maximise the full potential of your card printer and issue all kinds of ID cards with superior printing quality.
Q: What are the warranty conditions for Zenius?
A: Zenius is covered by a two-year-warranty, including printer and printing head.
Q: How can I launch a cleaning cycle?
A: Please refer to the user's guide or to the "How to" delivered on the cd with the printer.
Q: Cards are not fed or loaded properly. What can I do?
A: Check one by one: card thickness adjustment, printer cleaning, and finally, the card dimension and compatibility.
The Evolis Zenius is a lightweight and compact single-sided id card printer designed to print high quality cards in colour and monochrome. The Zenius is the optimal desktop printer for personalising ID cards and other cards that do not require magnetic or electronic encoding.
Printing | Single-Sided |
Print Type | Dye-Sublimation/Resin Thermal Transfer |
Print Area | Edge-to-Edge |
Resolution | 300 dpi resolution |
Card Feeding | Automatic or manual feeding |
Card Size | ISO CR80 - ISO7810 (53.98mm x 85.60) |
Card Thickness | 0.25 – 0.76 mm (10 to 30 mil), gauge adjustment |
Card Type | PVC, PET, Composite PVC, ABS cards, special varnished cards |
Input Hopper | 50 cards |
Output Hopper | 20 cards |
YMCKO | 120-150 cards per hour |
Monochrome | 400-500 cards per hour |
Supported Platforms | See specification sheet |
Memory | 16MB RAM |
Control Panel | 1 LED Button |
Communications | USB, Ethernet (Option) |
Supply Voltage | See specification sheet |
Interface | USB (1.0, 1.1, 2.0, 3.0) |
Temperature | 15~30 C |
Humidity | 20~65% non-condensing |
Dimension (H × W × D) | 195 x 205 x 315 mm (7.68’’ x 8.07’’ x 12.4’’) |
Kg/Lbs | 3.3kg/7.3lbs |
The Evolis Zenius plastic ID card printer is one of the easiest printers to set up and install, within minutes the Zenius is ready to print and issue Staff ID Cards.
To clean the Evolis Zenius card printer, you will need to purchase our basic printer cleaning kits. Once purchased, follow the instructions set-out in this video.
There are no reviews yet.